Mil-tek har løsninger til komprimering og genbrug af Polystyren (EPS6) - også kendt som Flamingo.
Klik på en af flamingo komprimatorerne nedenfor for at downloade en brochure.
Har du spørgsmål til vores udvalg af komprimatorer er du velkommen til at kontakte os her
Clips & compacts banding
Suitable for plastic or metal
Shreds up to 33m per minute
Reduces risk of injury or damage
Windowed drum for ease of use
Auto feed, adjustable timer and gear speed
Plastic strapping or banding can be troublesome to dispose of; it fills a lot of room in bins and represents a tripping hazard if left on the floor.
The Band Clipper boasts several safety features including a lock-out switch, a gear speed dial.
It is powered by a standard 220V motor.
Feed the banding into the funnel-shaped opening.
Make sure the banding is correctly fed in to avoid potential blockages.
Banding is collected in a receptacle housed inside the drum.
Release the safety latch to open the drum.
Feed the banding into the funnel opening. Banding is pulled in by the motor and then clipped by a rotating blade
A piece of banding of approximately 1m takes just 1.8 seconds to feed through and be clipped. This equates to 2000m per hour.
Most banding has some overlap when it is sealed. This can be fed into the machine, though make sure to feed it in the correct direction. For further information, refer to your user manual or watch the instructional video.
Plastic strapping up to approximately 34mm. If you have strapping that is broader, check with a Mil-tek consultant.
Yes it can cut steel banding and steel wires. However, it is likely to dull the blade of the knives more quickly than cutting plastic strapping. If in doubt, ask your Mil-tek rep or Technician for guidance.
Manufacturers that handle large volumes of plastic packaging will find the Band Clipper a useful addition.
Strapping can fill a large amount of empty space in bins, which in turn require regular changing. Not only will it free up space in mixed-waste bins, it reduces risk of injury or accident.
Facilities that regularly use forklift and pallet trucks in their daily operations can enjoy the benefits of a Mil-tek Band Clipper.
Loose banding and strapping can easily become entangled in the wheels of forklifts, causing expensive delays and risking serious injury. A Band Clipper eliminates this risk, simultaneously creating a neater, tidier workplace.
Facilities that handle large volumes of in-going and outgoing deliveries will invariably handle large amounts of plastic and metal strapping.
A Band Clipper, coupled with an air powered baler, allows for proper segregation of waste and increases recycling in the facility.
|Komprimeringsgrad||Up to 90%|
|Støjniveau||Max 90 dB(A)|